Your Choice: Type SLM 050
Characteristics
Performance Data

Characteristic Standard Option
Toothing Hardened and ground worm shaft / bronze worm gear See chapter 9.2.1
Gear ratio 10:1 to 83:1
Housing / Flanges Grey cast iron
Threaded mounting hole On gearbox side 1 and on the flanges See chapter 9.2.3
Shaft Material 1 C45, shaft ends greased

Fit with ISO j6 tolerance with parallel keyway: according to DIN 6885 Sheet 1

See chapter 4.6.2
Hollow shaft Material 1 C45, shafts greased

Fit with ISO H7 tolerance with parallel keyway: according to DIN 6885 Sheet 1

See chapter 4.6.3
Radial shaft seal ring NBR, form A See chapter 4.8
Ambient temperature - 10°C to +90°C. The values of the performance tables are valid for +20°C See chapter 4.9.3
Circumferential backlash < 30 arcmin See chapter 9.2.10
Protection classes IP 54 See chapter 4.5
Corrosion protection Prime coat; layer thickness > 40 µm See chapter 4.4.1
Bearing life L10h more than 15,000h See chapter 4.9.1
Oil change intervals Not required if the oil temperature is kept < 90°C

The lifetime of the bearings can be increased by the factor 1.5 if the oil is changed after the first 500 service hours and then every 5000 service hours.

See chapter 9.2.8
Lubricants Synthetic lubricants See chapter 9.2.8
Motor IEC standard motor in the prescribed efficiency class

 

P1[kW] n2[U/min] T2[Nm] T2N[Nm] T2 max[Nm] Gearbox size i[-] IEC-Motor
P1 N2 T T2N T2MAX GR UB MOTOR
0,18 18 65,9 137 197 050 38:1 080A-8
0,18 17 67,7 88 145 050 51:1 071A-6
0,18 16 60,2 63 112 050 83:1 063B-4
0,18 14 73,7 109 120 050 62:1 071A-6
0,18 13 84,6 91 145 050 51:1 080A-8
0,18 11 89,1 112 120 050 62:1 080A-8
0,25 26 63,4 85 145 050 51:1 071A-4
0,25 23 74,7 144 219 050 29:1 080B-8
0,25 22 69,5 105 120 050 62:1 071A-4
0,25 18 91,5 137 197 050 38:1 080B-8
0,25 14 102,0 109 120 050 62:1 071B-6
0,37 47 57,9 113 219 050 29:1 071B-4
0,37 47 62,4 110 179 050 19:1 080A-6
0,37 36 73,6 118 197 050 38:1 071B-4
0,37 31 84,3 121 219 050 29:1 080A-6
0,37 24 105,0 134 197 050 38:1 080A-6
0,37 23 111,0 144 219 050 29:1 090S-8
0,37 22 103,0 105 120 050 62:1 071B-4
0,37 18 136,0 137 197 050 38:1 090S-8
0,55 143 33,8 91 152 050 9.5:1 080A-4
0,55 72 62,0 106 179 050 19:1 080A-4
0,55 47 86,1 113 219 050 29:1 080A-4
0,55 36 109,0 118 197 050 38:1 080A-4
0,75 297 22,4 85 152 050 9.5:1 080A-2
0,75 143 46,1 91 152 050 9.5:1 080B-4
0,75 72 84,6 106 179 050 19:1 080B-4
1,10 297 32,9 85 152 050 9.5:1 080B-2
1,10 145 66,7 91 152 050 9.5:1 090S-4
1,50 299 44,6 85 152 050 9.5:1 090S-2
2,20 299 65,3 85 152 050 9.5:1 090L-2