Your Choice: Type SLM 100
CHARACTERISTICS
Performance Data

Characteristic Standard Option
Toothing Hardened and ground worm shaft / bronze worm gear See chapter 9.2.1
Gear ratio 10:1 to 83:1
Housing / Flanges Grey cast iron
Threaded mounting hole On gearbox side 1 and on the flanges See chapter 9.2.3
Shaft Material 1 C45, shaft ends greased

Fit with ISO j6 tolerance with parallel keyway: according to DIN 6885 Sheet 1

See chapter 4.6.2
Hollow shaft Material 1 C45, shafts greased

Fit with ISO H7 tolerance with parallel keyway: according to DIN 6885 Sheet 1

See chapter 4.6.3
Radial shaft seal ring NBR, form A See chapter 4.8
Ambient temperature - 10°C to +90°C. The values of the performance tables are valid for +20°C See chapter 4.9.3
Circumferential backlash < 30 arcmin See chapter 9.2.10
Protection classes IP 54 See chapter 4.5
Corrosion protection Prime coat; layer thickness > 40 µm See chapter 4.4.1
Bearing life L10h more than 15,000h See chapter 4.9.1
Oil change intervals Not required if the oil temperature is kept < 90°C

The lifetime of the bearings can be increased by the factor 1.5 if the oil is changed after the first 500 service hours and then every 5000 service hours.

See chapter 9.2.8
Lubricants Synthetic lubricants See chapter 9.2.8
Motor IEC standard motor in the prescribed efficiency class

 

P1

[kW]

n2

[rpm]

T2

[Nm]

T2N

[Nm]

T2 max

[Nm]

Gearbox size i [-] IEC motor
0.75 18 295.0 704 1080 100 52:1 090S-6
14 348.0 886 1040 100 63:1 090S-6
13 397.0 728 1080 100 52:1 100LA-8
11 404.0 599 1000 100 82:1 090S-6
11 423.0 886 1040 100 63:1 100LA-8
8 546.0 599 1000 100 82:1 100LA-8
1.10 27 300.0 670 1080 100 52:1 090S-4
22 334.0 817 1040 100 63:1 090S-4
18 432.0 704 1080 100 52:1 090L-6
17 408.0 599 1000 100 82:1 090S-4
14 510.0 886 1040 100 63:1 090L-6
13 582.0 728 1080 100 52:1 100LB-8
11 592.0 599 1000 100 82:1 090L-6
11 621.0 886 1040 100 63:1 100LB-8
 1.50 27 409.0 670 1080 100 52:1 090L-4
23 486.0 933 1582 100 40:1 100LA-6
23 486.0 950 1765 100 30:1 112M-8
22 456.0 817 1040 100 63:1 090L-4
18 589.0 704 1080 100 52:1 100LA-6
18 605.0 1025 1528 100 40:1 112M-8
17 556.0 599 1000 100 82:1 090L-4
15 649.0 886 1040 100 63:1 100LA-6
11 847.0 886 1040 100 63:1 112M-8
 2.20 47 367.0 748 1765 100 30:1 100LA-4
35 480.0 817 1582 100 40:1 100LA-4
31 542.0 825 1765 100 30:1 112M-6
27 599.0 670 1080 100 52:1 100LA-4
24 683.0 933 1582 100 40:1 112M-6
24 683.0 950 1765 100 30:1 132SB-8
22 669.0 817 1040 100 63:1 100LA-4
18 887.0 1025 1582 100 40:1 132SB-8
P1

[kW]

n2

[rpm]

T2

[Nm]

T2N

[Nm]

T2 max

[Nm]

Gearbox size i [-] IEC motor
 3.00 71 359.0 778 1440 100 20:1 100LB-4
47 500.0 748 1765 100 30:1 100LB-4
35 655.0 817 1582 100 40:1 100LB-4
24 931.0 933 1582 100 40:1 132SB-6
24 931.0 950 1765 100 30:1 132MB-8
 4.00 71 479.0 778 1440 100 20:1 112M-4
47 666.0 748 1765 100 30:1 112M-4
 5.50 290 170.0 555 1090 100 10:1 132SA-2
143 345.0 703 1090 100 10:1 132SB-4
72 649.0 778 1440 100 20:1 132SB-4
 7.50 290 232.0 555 1090 100 10:1 132SB-2
143 471.0 703 1090 100 10:1 132MB-4
 9.00 291 278.0 555 1090 100 10:1 132MA-2