Servo gearboxes (precision gearboxes)

Special servo gearboxes have been developed for the requirements of highly dynamic servo-motors.
The proven ATEK bevel gearbox and worm gearbox series form the basis for them.
The combination of a large number of motor flanges and an insertable, zero-play clamp coupling enables the adaptation to the most servo-motors.

Due to the modular system, a later replacement of the motor flange and the coupling half on the motor side is very easy.

Highly dynamic servo drive Solutions

Servo gearboxes (precision gearboxes) are highly precise and highly dynamic servo drive solutions. The high-performance gearboxes cope with today’s requirements in every respect. It is not without reason that they are used worldwide, inter alia, in the automotive industry.

Product features

  • High speeds up to n1 = 6000 rpm
  • Minimized circumferential backlash (optional)
  • High precision
  • Housing made of grey cast iron

Application examples

  • Automation
  • Positioning drives
  • Robotics
  • Highly dynamic applications
  • Automotive

Type LC – Servo bevel gearboxes

  • Gear ratios: i = 1:1 up to 4:1
  • Maximum output torque: 16 Nm
  • 2 gearbox sizes with edge lengths of 035 and 45 mm
  • Suitable for the mounting of IEC standard motors
  • Low-backlash design: less than 10 angular minutes possible 
  • Housing made of aluminium
  • The L-series miniature bevel gearboxes can be extended by a flange to attach a motor.
More details

Type VC – Servo bevel gearboxes

  • Gear ratios: i = 1:1 up to 6:1
  • Maximum acceleration torques up to T2B = 700 Nm
  • 6 gearbox sizes with edge lengths of 065 up to 200 mm
  • High efficiency
  • Minimised circumferential backlash (optional)
  • Bevel gearboxes suitable for fitting servo-motors
  • Zero-play three-piece claw coupling
More details View 3D Cad model

Type HC – Servo hypoid gearboxes

  • Gear ratios: i = 3:1 up to 15:1
  • Maximum acceleration torques on output: 2160 Nm
  • 6 gearbox sizes; centre-to-centre distance: 090 to 260 mm
  • Minimised circumferential backlash (optional)
  • Housing made of aluminium
  • Hypoid gearboxes suitable for fitting servo-motors
  • Non-positive connection between motor and gearbox
More details View 3D Cad model

Type SC – Servo worm gearboxes

  • Gear ratios: i = 10:1 up to 20:1 (i>20 upon request)
  • Maximum acceleration torques on output: 1100 Nm
  • 5 gearbox sizes ; centre-to-centre distance: 040 to 100 mm
  • Minimised circumferential backlash (optional)
  • Housing made of grey cast iron
  • Worm gearboxes suitable for fitting servo-motors
  • Non-positive connection between motor and gearbox
More details View 3D Cad model