Your Choice: Type VLM 260
Characteristics
Performance Data

Characteristic Standard Option
Toothing Bevel gear, spiral-toothed See chapter 6.2.1
Gear ratio 3:1 to 6:1
Housing / Flanges Grey cast iron
Threaded mounting hole On all housing surfaces without flange and on all flanges. See chapter 6.2.3
Shaft Material 1 C45, shaft ends greased

Fit with ISO 6 tolerance with parallel keyway: according to DIN 6885 Sheet 1

See chapter 4.6.2
Hollow shaft Material 1 C45, shafts greased

Fit with ISO 7 tolerance with parallel keyway: according to DIN 6885 Sheet 1

See chapter 4.6.3
Radial shaft seal ring NBR, form A See chapter 4.8
Ambient temperature - 10°C to +90°C. The values of the performance tables are valid for +20°C See chapter 4.9.3
Circumferential backlash < 30 arcmin See chapter 6.2.10
Protection class IP 54 See chapter 4.5
Corrosion protection Prime coat; layer thickness > 40 µm See chapter 4.4.1
Bearing life L10h more than 15,000h See chapter 4.9.1
Oil change intervals Not required if the oil temperature is kept < 90°C

The lifetime of the bearings can be increased by the factor 1.5 if the oil is changed after the first 500 service hours and then every 5000 service hours.

See chapter 6.2.8
Lubricants Synthetic lubricants See chapter 6.2.8
Motor IEC standard motor in the prescribed efficiency class

P1 [kW] n2  [rpm] T2 [Nm] T2N [Nm] T2MAX [Nm] i [-] IEC motor Gearbox size P1NT [kW]
7.5 144 472.5 1100 1910 5:1 160LB-8 260 42
11 192 519.8 990 1910 5:1 160LA-6 260 42
182 546.8 1100 1940 4:1 180L-8 260 42
146 683.5 1100 1910 5:1 180L-8 260 42
15 293 464.5 880 1910 5:1 160LA-4 260 42
242 561.2 1050 1940 4:1 180L-6 260 42
194 701.5 990 1910 5:1 180L-6 260 42
146 932.1 1100 1910 5:1 200LB-8 260 42
18.5 975 172.1 1050 2310 1:1 200LA-6 260 42
650 258.2 1000 1000 1.5:1 200LA-6 260 42
325 516.4 990 1940 3:1 200LA-6 260 42
294 570.9 8 80 1910 5:1 180M-4 260 42
243 690.7 1050 1940 4:1 200LA-6 260 42
195 860.7 990 1910 5:1 200LA-6 260 42
22 650 307.1 1000 1000 1.5:1 200LB-6 260 42
487 409.8 1050 1200 2:1 200LB-6 260 42
367 543.9 900 1940 4:1 180L-4 260 42
294 678.9 880 1910 5:1 180L-4 260 42
243 821.4 1050 1940 4:1 200LB-6 260 42