Your Choice: Type VLM 160
Characteristics
Performance Data

Characteristic Standard Option
Toothing Bevel gear, spiral-toothed See chapter 6.2.1
Gear ratio 3:1 to 6:1
Housing / Flanges Grey cast iron
Threaded mounting hole On all housing surfaces without flange and on all flanges. See chapter 6.2.3
Shaft Material 1 C45, shaft ends greased

Fit with ISO 6 tolerance with parallel keyway: according to DIN 6885 Sheet 1

See chapter 4.6.2
Hollow shaft Material 1 C45, shafts greased

Fit with ISO 7 tolerance with parallel keyway: according to DIN 6885 Sheet 1

See chapter 4.6.3
Radial shaft seal ring NBR, form A See chapter 4.8
Ambient temperature - 10°C to +90°C. The values of the performance tables are valid for +20°C See chapter 4.9.3
Circumferential backlash < 30 arcmin See chapter 6.2.10
Protection class IP 54 See chapter 4.5
Corrosion protection Prime coat; layer thickness > 40 µm See chapter 4.4.1
Bearing life L10h more than 15,000h See chapter 4.9.1
Oil change intervals Not required if the oil temperature is kept < 90°C

The lifetime of the bearings can be increased by the factor 1.5 if the oil is changed after the first 500 service hours and then every 5000 service hours.

See chapter 6.2.8
Lubricants Synthetic lubricants See chapter 6.2.8
Motor IEC standard motor in the prescribed efficiency class

P1 [kW] n2  [rpm] T2 [Nm] T2N [Nm] T2MAX [Nm] i [-] IEC motor Gearbox size P1NT [kW]
2.2 157 127.1 165 200 6:1 112M-6 160 15
141 141.6 240 420 5:1 132SB-8 160 15
118 169.2 178 200 6:1 132SB-8 160 15
3 235 115.8 145 350 6:1 100LB-4 160 15
190 143.3 225 420 5:1 132SB-6 160 15
177 153.3 250 422 4:1 132MB-8 160 15
142 191.7 240 420 5:1 132MB-8 160 15
4 355 102.2 220 422 4:1 112M-4 160 15
284 127.8 215 420 5:1 112M-4 160 15
237 152.8 240 422 4:1 132MA-6 160 15
190 191.0 225 420 5:1 132MA-6 160 15
5.5 476 104.7 230 457 3:1 132SB-4 160 15
357 139.6 220 422 4:1 132SB-4 160 15
316 157.6 245 457 3:1 132MB-6 160 15
286 174.5 215 420 5:1 132SB-4 160 15
237 210.1 240 422 4:1 132MB-6 160 15
7.5 580 117.3 180 420 5:1 132SB-2 160 15
476 142.8 230 457 3:1 132MB-4 160 15
357 190.3 220 422 4:1 132MB-4 160 15
9 1430 57.1 260 660 1:1 132MC-4 160 15
970 84.2 190 457 3:1 132MA-2 160 15
953 85.7 252 360 1.5:1 132MC-4 160 15
727 112.2 180 422 4:1 132MA-2 160 15
715 114.2 245 320 2:1 132MC-4 160 15
582 140.3 180 420 5:1 132MA-2 160 15
476 171.3 230 457 3:1 132MC-4 160 15
357 228.4 220 422 4:1 132MC-4 160 15