Your Choice: Type VLM 140
Characteristics
Performance Data

Characteristic Standard Option
Toothing Bevel gear, spiral-toothed See chapter 6.2.1
Gear ratio 3:1 to 6:1
Housing / Flanges Grey cast iron
Threaded mounting hole On all housing surfaces without flange and on all flanges. See chapter 6.2.3
Shaft Material 1 C45, shaft ends greased

Fit with ISO 6 tolerance with parallel keyway: according to DIN 6885 Sheet 1

See chapter 4.6.2
Hollow shaft Material 1 C45, shafts greased

Fit with ISO 7 tolerance with parallel keyway: according to DIN 6885 Sheet 1

See chapter 4.6.3
Radial shaft seal ring NBR, form A See chapter 4.8
Ambient temperature - 10°C to +90°C. The values of the performance tables are valid for +20°C See chapter 4.9.3
Circumferential backlash < 30 arcmin See chapter 6.2.10
Protection class IP 54 See chapter 4.5
Corrosion protection Prime coat; layer thickness > 40 µm See chapter 4.4.1
Bearing life L10h more than 15,000h See chapter 4.9.1
Oil change intervals Not required if the oil temperature is kept < 90°C

The lifetime of the bearings can be increased by the factor 1.5 if the oil is changed after the first 500 service hours and then every 5000 service hours.

See chapter 6.2.8
Lubricants Synthetic lubricants See chapter 6.2.8
Motor IEC standard motor in the prescribed efficiency class

P1 [kW] n2  [rpm] T2 [Nm] T2N [Nm] T2MAX [Nm] i [-] IEC motor Gearbox size P1NT [kW]
1.5 154 88.4 113 200 6:1 100LA-6 140 10
140 97.2 130 250 5:1 112M-8 140 10
117 116.3 118 200 6:1 112M-8 140 10
2.2 188 106.2 124 250 5:1 112M-6 140 10
3 633 43.0 175 210 1.5:1 132SB-6 140 10
475 57.3 152 180 2:1 132SB-6 140 10
316 86.0 160 280 3:1 132SB-6 140 10
282 96.5 115 250 5:1 100LB-4 140 10
237 114.6 136 280 4:1 132SB-6 140 10
4 633 57.3 175 210 1.5:1 132MA-6 140 10
572 63.4 100 250 5:1 112M-2 140 10
475 76.4 152 180 2:1 132MA-6 140 10
355 102.2 120 280 4:1 112M-4 140 10
316 114.6 160 280 3:1 132MA-6 140 10
5.5 2900 17.3 120 430 1:1 132SA-2 140 10
1933 26.0 113 210 1.5:1 132SA-2 140 10
1430 34.9 162 430 1:1 132SB-4 140 10
953 52.3 155 210 1.5:1 132SB-4 140 10
715 69.8 138 180 2:1 132SB-4 140 10
633 78.8 175 210 1.5:1 132MB-6 140 10
580 86.0 100 250 5:1 132SA-2 140 10
476 104.7 146 280 3:1 132SB-4 140 10
316 157.6 160 280 3:1 132MB-6 140 10
7.5 2900 23.5 120 430 1:1 132SB-2 140 10
1933 35.2 113 180 1.5:1 132SB-2 140 10
1430 47.6 162 430 1:1 132MB-4 140 10
966 70.4 110 280 3:1 132SB-2 140 10
953 71.4 155 210 1.5:1 132MB-4 140 10
715 95.2 138 180 2:1 132MB-4 140 10
476 142.8 146 280 3:1 132MB-4 140 10
9 2910 28.1 120 430 1:1 132MA-2 140 10
1940 42.1 113 210 1.5:1 132MA-2 140 10
1430 57.1 162 430 1:1 132MC-4 140 10
953 85.7 155 210 1.5:1 132MC-4 140 10
715 114.2 138 180 2:1 132MC-4 140 10